Tech Tip

TECH TIP NO.: TT701.001
PRODUCT: Excalibur PCI Pentium
REVISION: C
DATE: June 3, 1994
RELEASED BY: Documentation Control

SUBJECT: Attaching Power Supply Cables

An Addendum to the Excalibur PCI Pentium manual, MAN-701-ADD3, has been
released and will ship with all 701 motherboards. The addendum will also be
placed on the BBS. The text of the addendum follows:

Page 25 Replace the paragraph after the Connect to P5 and P2 heading with the
following:

Attach the power supply cables to P5 and P2 on the motherboard. AT-compatible
power supplies have two 6-pin connectors. "The six-pin connector with 3 red
wires and 2 black wires is connected to P2 and the remaining six-pin connector
is connected to P5, as shown below." P7 is an auxiliary power supply connector.

The illustration on this page is correct.

In the printed manual P2 and P5 were reversed in the " " sentence above. As
indicated, the graphic illustrating attaching the connectors is correct.